Best for
High-standard packaging where clean servo movement, lower noise, and repeatable positioning matter more than maximum hydraulic force.
All-Electric
Clean Servo Production JD Series for High-Standard Packaging
All-electric movement for products that require cleaner operation, lower noise, and repeatable positioning.
The JD Series replaces hydraulic movements with servo-driven systems. It is suited to small and medium packaging products where cleanliness, repeatability, and lower noise are more important than very high clamping force.
When the JD Series fits best
Not ideal for
Large industrial products, heavy molds, or applications where accumulator-head shot size and high clamping force are the main requirements.
Key technical factors
Check product size, clean-room expectations, servo-axis requirements, energy target, cycle stability, and service support for electric drives.
Oil-Free Motion
- Clean movement: Electric servo movement reduces hydraulic oil exposure around the main motion system.
- Repeatability: Servo-controlled movement supports consistent positioning.
- Lower noise: Electric movement can reduce operating noise compared with traditional hydraulic systems.
Process Control
- Recipe management: Digital settings help operators repeat approved machine conditions.
- Cycle control: Servo motion can support faster, repeatable movement when the mold and product allow it.
- Parison control: Integrated parison control supports wall thickness adjustment.
Energy and Maintenance
- Demand-based power: Servo motors use power mainly during movement.
- Reduced hydraulic maintenance: Oil circuit maintenance is reduced because the main movements are electric.
- Monitoring: Diagnostics can support troubleshooting and preventive checks.
Production Components
- Electrical systems: Component brands are selected by project configuration.
- Pneumatics: Air control components are matched to regional service needs.
- Technical support: Jonh Huah supports setup, training, and process adjustment.
JDS Series Specifications
Single Station| Model | Screw Dia : Extrusion | Cavities : Center Dist. | Clamp Force (ton) | Stroke (mm) | Mold Dim (mm) |
|---|---|---|---|---|---|
| JDS-300 | 40 mm : 15 kg 45 mm : 30 kg | 1 2 : 120mm 3 : 80mm 4 : 50/60mm | 5 | 320 - 190 | W310 x H300 |
| JDS-400 | 65 mm : 75 kg 75 mm : 100 kg | 1 2 : 160mm 3 : 125mm 4 : 85mm | 8 | 480 - 260 | W445 x H370 |
| JDS-500 | 75 mm : 100 kg 80 mm : 120 kg | 1 2 : 200mm 3 : 160mm 4 : 125mm 6 : 85mm | 10 | 480 - 260 | W580 x H370 |
JDD Series Specifications
Double Station| Model | Screw Dia : Extrusion | Cavities : Center Dist. | Clamp Force (ton) | Stroke (mm) | Mold Dim (mm) |
|---|---|---|---|---|---|
| JDD-400 | 80 mm : 120 kg 90 mm : 180 kg | 1 2 : 160mm 3 : 125mm 4 : 85mm | 8 | 480 - 260 | W445 x H370 |
| JDD-500 | 90 mm : 180 kg 100 mm : 250 kg | 1 2 : 200mm 3 : 160mm 4 : 125mm 6 : 85mm | 10 | 480 - 260 | W580 x H370 |
JD Series ‧ Expert FAQ
Why choose all-electric blow molding for medical or cosmetic packaging?
All-electric movement reduces hydraulic oil exposure around the main machine motions and supports repeatable positioning, which is useful for cleanliness-sensitive products.
Is the JD Series suitable for large industrial parts?
Usually not as the first choice. Large drums, automotive parts, and high-clamping-force products are normally evaluated with hybrid or accumulator-head hydraulic machines.