Best for
Long-run bottle, container, and jerrycan production that needs automatic deflashing, trimming, leak testing, and stable material handling.
JN Series
Automated Output JN Series for Long-Run Production
Built for mass-production containers that need automatic deflashing, neck trimming, leak testing, recycling, and stable line integration.
The JN Series is designed for automated extrusion blow molding production. It is commonly used for bottles, containers, and jerrycans where output, trimming, leak testing, and material recycling must work as one production flow.
When the JN Series fits best
Not ideal for
Very small trial runs where the automation cost is hard to justify, or very large parts that need an accumulator-head machine.
Key technical factors
Confirm target hourly output, cavity layout, neck-trimming method, flash recycling flow, leak-test requirements, and downstream conveyor space.
Automation Core
- Integrated workflow: Deflashing, neck trimming, conveying, and downstream inspection can be configured into the line.
- Production structure: Built for continuous production with maintainable hydraulic and control systems.
- Leak testing option: Optional leak testing can be matched to container size and cycle time.
Toggle Clamping
- Force distribution: Toggle clamping supports stable mold closing and parting-line control.
- Mechanical advantage: The structure provides clamping force suitable for repeated container production.
- Long-run use: Designed for production lines where repeatability matters across many cycles.
Cost Control
- Labor reduction: Automatic deflashing and trimming reduce manual secondary work.
- Material handling: Flash can be routed into recycling when the material and quality specification allow it.
- Cutting setup: Neck cutting devices are selected according to bottle shape and material.
Energy and Process Control
- Servo-hydraulic option: Energy use depends on cycle time, hydraulic demand, and cooling time.
- Wall thickness control: A parison controller can improve material distribution.
- Factory environment: Lower oil temperature and noise depend on the selected drive configuration.
JN Series Specifications
Single Station| Model | Screw Dia : Extrusion | Cavities : Center Dist. | Clamp Force (ton) | Stroke (mm) | Dimension (mm) |
|---|---|---|---|---|---|
| JN-370 | 55 mm : 50 kg 65 mm : 75 kg | 1 2 : 160mm 3 : 110mm 4 : 85mm | 7 | 410 - 140 | W405 x H330 |
| JN-490 | 65 mm : 75 kg 75 mm : 100 kg | 1 2 : 200mm 3 : 125mm 4 : 100mm | 12 | 410 - 140 | W450 x H420 |
| JN-640 | 75 mm : 100 kg 80 mm : 120 kg | 1 2 : 200mm 3 : 160mm 4 : 125mm 6 : 85mm | 20 | 640 - 220 | W550 x H420 |
| JN-1000 | 75 mm : 100 kg 80 mm : 120 kg | 1 | 22 | 1000 - 480 | W450 x H600 |
JN Series Specifications
Double Station| Model | Screw Dia : Extrusion | Cavities : Center Dist. | Clamp Force (ton) | Stroke (mm) | Dimension (mm) |
|---|---|---|---|---|---|
| JN-370-2 | 75 mm : 100 kg 80 mm : 120 kg | 1 2 : 160mm 3 : 110mm 4 : 85mm | 7 | 410 - 140 | W405 x H330 |
| JN-490-2 | 80 mm : 120 kg 90 mm : 180 kg | 1 2 : 200mm 3 : 125mm 4 : 100mm | 12 | 410 - 140 | W450 x H420 |
| JN-640-2 | 90 mm : 180 kg 100 mm : 250 kg | 1 2 : 200mm 3 : 160mm 4 : 125mm 6 : 85mm | 20 | 640 - 220 | W550 x H420 |
| JN-1000-2 | 90 mm : 180 kg 100 mm : 250 kg | 1 | 22 | 1000 - 480 | W450 x H600 |
JN Series ‧ Expert FAQ
How does the JN Series support automated production?
The JN Series can integrate deflashing, neck trimming, conveying, leak testing, feeding, and recycling according to the product and line layout.
Why use toggle clamping for mass production?
Toggle clamping provides mechanical advantage and repeatable mold closing, which helps maintain parting-line stability over long production runs.